But this phone may have some system problems that includes:
1. The application run automatically
2. When you are connected to the internet the phone download files automatically that are not your desire
3. Or it display message like "unfortunately system has stopped" or "unfortunately google play service has stopped".
4. When you power on your phone display only logo and nothing else is happen.
5. when powering on your phone only white screen appear and nothing else.
If you have a problem like this then you have to flash your phone in order to over come these problems so i'll give you the link for Tecno i3 flash file to flash your phone.
Of cause you have an ides of flashing that's why you are here on this post but i suggest you to read this full content that may help you to escape unexpected error during flashing your phone.
Also read a full TECNO i3 SPECS to compare with your phone. also this will prevent flashing the wrong rom.
NOTE: Flashing the wrong stockrom may cause a serious problems and some time may damage your phone and can't be flashed again.
As I said that you have an idea of flashing so you are flashing your rom on your own. I'm not responsible for any damage.
Short tutorial on how to flash your tecno i3, Please read this tutorials to prevent any error while flashing your phone.
1. Download MTK USB-VCOM driver and install it in your computer. If you don't know how to install this driver then read read full tutorial on how to install MTK USB-VCOM drivers.
2. Download SP-Flash tool and extract it to your computer.
3. Download TECNO i3 firmware/flashfile and extract it to your computer.
4. Open Sp flash tool folder that you extracted and run "flash_tool.exe" or "flash tool" .(Recommended to run it as administrator"Run as administrator").
5. Click choose "Scatter loading file" and navigate where you extracted your flash file and then select the scatter file usually it looks like "MT65xx_Android_scatter".
6. In sp flash tool do not select preloader if you don't what you are doing and then click download.
7. Power off your phone and an then remove the battery.
8. Connect your phone to your computer using USB cable wit out battery.
9. Once your computer has detected your phone then immediately inset your battery. If your phone did't detected your phone then the driver is installed correctly or your USB cable does not work properly so try to fix these issues and try again.
10. Wait until the flashing process is done.
11. Disconnect your phone from computer and power it on.
You are all done.
NOTE:Once you power on your phone it will take long time at the first time then normal.
TECNO I3 SPECS
GENERAL
Release date April 2017
Operating System Android 7.0
Processor 1.3GHz quad-core MediaTek MT6737
Internal storage 16GB Up to 128GB
Dimensions (mm) 142.75 x 70.50 x 7.90
Colours Champagne Gold, Sky Black, Space Grey
DISPLAY
Screen size (inches) 5.00
Touchscreen Yes
Resolution 720x1280 pixels
CAMERA
Rear camera 8-megapixel
Flash No
Front camera 8-megapixel
CONNECTIVITY
Wi-Fi Yes
Wi-Fi standards supported NA
GPS Yes
Bluetooth Yes, v 4.20
NFC No
Infrared No
USB OTG No
Headphones Yes
FM No
Number of SIMs 2
SIM 1
SIM Type Nano-SIM
GSM/CDMA GSM
3G Yes
4G/ LTE Yes
SIM 2
SIM Type Nano-SIM
GSM/CDMA GSM
3G No
4G/ LTE No
SENSORS
Compass/ Magnetometer No
Proximity sensor Yes
Accelerometer No
Ambient light sensor Yes
Gyroscope No
Barometer No
Temperature sensor No
BATTERY
Battery capacity (mAh) 3050
Removable battery No
Click the button below to download this firmware.
Chapisha Maoni