HOW TO FLASH ANY ANDROID PHONE (MTK)

If you want to flash your android(mtk) phone then in this tutorial we are going to learn how to flash any android (mtk) phone
Please follow the step by step procedures to safely flash your phone
                       REQUIREMENTS
1.SP flash tool: Thisnis the tool that we use to flash android phone
2.Mt65xx preloader drivers: this is the drivers that connect our phone to the computer via usb cable
3.Flash file for your phone: This is the file that contain all the system and the system app that we want to flash our phone
NOTE:Flashing your phone with the files that is not compatible with your phone will couse a serious problem.
                              PROCEDURES

1.Download the SP flash tool from the link below this post and extract to your desktop. You can extract to anwhare in your computer
2.Download Mt65xx drivers from the link below this post and extract it to your desktop and install it. To install Mt65xx preloader drivers.
Read HOW TO INSTALL MT65XX PRELOADER DRIVERS
3.Download flash file which is compatible to your phone and extract it to your desktop.
To download the flash file go to http://needrom.com  and browse to selsct the flash file or seach on google by typing the name ,model of your phone followed by “flash file” . For example “TECNO P5 FLSHFILE” OR “TECNO P5 FLASHFILE FREE DOWNLOAD”
4.Extract your flash file to your desktop or any where you want
5.Open SP flash file folder and run “flash_tool” or run as administrator

6.Click scatter-loading batton at the top right corner of the sp flash tool and navigate to where you extracted your flash file and select the scatter file and it looks like “MT6582_Android_scatter”. the sp flash tool will load the content and redirect back to spflash tool

  
7.Un mak the preloader and click the download button.

 

NONET:Flashing with a preloader may couse your phone to breack
8.Remove the battery in your phone and connect to your computer using USB cable, and wait your computer to detect your phone. The red bar will appear at the bottom of the SPflash tool if your phone is detected by SP flash tool
9.After SP flash tool detected your phone insert the battery and the flashing prosses will begin.The yellow progressing bar will appear if the flashing prosses begin
10.Wait untill the green cycle with a green tick appear indicating that the flashing prosses is completed
NOTE:Do not touch your phone and your USB cable while you flah your phone
              All you are doing is at your own risk. this is just the guide on how to flash android (mtk) phone

        SP FLASH TOOL